Menu
 

BestReviews is reader-supported and may earn an affiliate commission. Details

Best Infrared Lens Filters

Bottom line
Pros
Cons
Best of the Best
Hoya 58mm Infrared Filter
Hoya
58mm Infrared Filter
Best Performance

One of the best products on the market in terms of performance.

Check Price
Check Price at Amazon
Best Performance
Bottom Line

One of the best products on the market in terms of performance.

Pros

Extremely high-quality filter that justifies its higher price point with excellent performance levels. Will filter all visible light up to 720nm, which is a strong performance level. Fits cameras with a 58mm lens thread. Will give you good results over a long time.

Cons

A little more expensive than some others. Could use a better instruction manual.

Best Bang for the Buck
Fotga 58mm Six-in-One Adjustable Variable Infrared IR Pass X-Ray Lens Filter
Fotga
58mm Six-in-One Adjustable Variable Infrared IR Pass X-Ray Lens Filter
Simple Yet Solid

This option features 6 adjustable settings to control the amount of IR light captured in different shots.

Check Price
Check Price at Amazon
Simple Yet Solid
Bottom Line

This option features 6 adjustable settings to control the amount of IR light captured in different shots.

Pros

Serves as 6 varying filters with adjustment wheel on the side of the lens. Control the amount of IR light wavelengths from 530nm to 750nm. Provides range and variance in creative, colorful photos. Available in 10 different lens thread sizes. Affordable.

Cons

Some users experienced vignetting on their images, or uneven degradation.

Urth 58mm Infrared (R72) Lens Filter
Urth
58mm Infrared (R72) Lens Filter
Most Eco-friendly

Made with IR72 glass for crisp photos, and each purchase funds 5 trees to be planted in Madagascar.

Check Price
Check Price at Amazon
Most Eco-friendly
Bottom Line

Made with IR72 glass for crisp photos, and each purchase funds 5 trees to be planted in Madagascar.

Pros

Commonly used 58mm lens thread size. Lens glass is 20-layer; nano-coated. Cuts visible light to capture IR light photos. Creates stunning contrast and high-quality clarity. Contributes to the environment by funding 5 trees to be planted with every filter purchase. Water-resistant.

Cons

Not compatible with cameras equipped with IR sensors in front of the filter. 58mm thread size only.

ICE 77mm Infrared Filter
ICE
77mm Infrared Filter
Best for Wide-Angle Lenses

Sharp IR filter with a double-threaded outer frame to allow for the attachment of additional filters.

Check Price
Check Price at Amazon
Best for Wide-Angle Lenses
Bottom Line

Sharp IR filter with a double-threaded outer frame to allow for the attachment of additional filters.

Pros

Works especially well when shooting with wide-angle lenses (as opposed to other IR filters). Thread size and wavelength measurements are clearly marked on the edge, making it easy to grab the correct filter.

Cons

Little is known about the manufacturer.

Green-L IR Glass Infrared Filter
Green-L
IR Glass Infrared Filter
Best for Beginners

It has a nice build quality for those just starting out with IR photography, especially considering the low price.

Check Price
Check Price at Amazon
Best for Beginners
Bottom Line

It has a nice build quality for those just starting out with IR photography, especially considering the low price.

Pros

Available in filter thread sizes between 25mm and 82mm, so you can find just the right one. Versatile in the wavelengths of IR rays it will block (between 680nm and 950nm). Uses a premium aluminum alloy for the threads, delivering excellent quality.

Cons

May not fit all DSLR cameras or mirrorless cameras properly.

Why trust BestReviews?
BestReviews spends thousands of hours researching, analyzing, and testing products to recommend the best picks for most consumers. We only make money if you purchase a product through our links, and all opinions about the products are our own. About BestReviews  
BestReviews spends thousands of hours researching, analyzing, and testing products to recommend the best picks for most consumers. We only make money if you purchase a product through our links, and all opinions about the products are our own. About BestReviews  
BestReviews spends thousands of hours researching, analyzing, and testing products to recommend the best picks for most consumers. We buy all products with our own funds, and we never accept free products from manufacturers.About BestReviews 
HOW WE TESTED

We recommend these products based on an intensive research process that's designed to cut through the noise and find the top products in this space. Guided by experts, we spend hours looking into the factors that matter, to bring you these selections.

First Reviewed
August 20, 2021
54
Models
considered
8
Hours
researched
Category cover

Buying guide for Best infrared lens filters

Kyle Schurman
Written by Kyle Schurman

Updated November 2021

The early days of film photography produced black-and-white photos. Eventually, color photos became the standard, and full color has remained the standard with the migration to digital photography. Photographers also enjoy the opportunity to shoot photos that include all kinds of special effects and use them to create memorable images. Infrared (IR) photography requires a bit more planning than some other special effects, but the payoff is worth it when done correctly, and one way to do it correctly is with infrared lens filters.

Depending on the gear you own, the cheapest and easiest way to start shooting IR photos is by using infrared lens filters. These filters screw over the lens of compatible DSLR and mirrorless cameras. Infrared lens filters are not compatible with fixed lens cameras or smartphone cameras.

You need to use some care to find the IR lens filters that match the lenses you own, but once you do, you’re ready to start shooting some really cool photographs.

Content Image
If you’re unsure what IR photography is, do a quick online image search for “infrared photos.” You’ll find some amazing images, and you also may get some ideas for your own IR photography subjects.

Key considerations

Size

When seeking an IR lens filter that matches your camera gear, you need to understand how these filters attach.

  • Thread: The IR lens filter typically screws over the front glass of the lens. The filter has a thread on the outside that must match the thread on the interior edge of the lens housing.

    To find the thread size for a particular lens, look on the lens for a diameter symbol (⌀). Often, this symbol is printed on the rim around the front glass of the lens. Next to this symbol, you’ll see a number. This is the measurement of the thread in millimeters. Sometimes this number has “mm” after it, but sometimes it doesn’t.) Occasionally, you may find an older lens that doesn’t have the ⌀ symbol. If this is the case, the lens may not have a thread that can accept an IR lens filter.

    Common thread sizes are 37mm to 77mm, but you can find lenses with measurements outside this range, too. Once you know the thread size of your lens, you can pick a filter to match.
     

  • Step-up/step-down rings: If the IR lens filter doesn’t match your lens, you can purchase a step-up or step-down ring. This allows you to use the filter on lenses with different thread sizes.

Infrared lens filter features

After figuring out how to find the proper filter size to match your lens, you then need to choose the type of filter you want. Different IR lens filters block different types of light, creating different effects.

Wavelengths

Each filter has a number referring to the range of wavelengths of light it blocks. Visible light is about 380 to 740 nanometers (nm), although some experts list the range as 400 to 700 nanometers. Infrared begins at around 700 (near the edge of the red portion of the visible spectrum) and goes to about 1,000 nanometers. You may find some IR filters in between the wavelengths listed here, such as 595nm. This type of filter includes some of the benefits of the two filters closest to it.

Here are four common IR lens filter measurements and when they’re useful.

  • 550nm: This filter blocks all light shorter than 550nm, so you can see a mixture of visible and IR wavelengths. In the infrared photo, you’ll see some deep blues and reds and more colors than appear using stronger filters in this list. This filter produces less contrast than stronger filters and works nicely when photographing people for infrared portraits.

  • 665nm: The 665nm IR filter produces some interesting colors for landscape photography. It turns leaves almost bright white while maintaining some of the blue in the sky. You also can shoot portraits with this IR lens filter, but you’ll have a bit more contrast than with the 550nm filter. This filter creates photos with an almost dreamy feel because of the lack of sharpness.

  • 720nm: This is the standard IR filter and the most common choice among photographers. It blocks nearly all visible light, allowing just a hint of the red spectrum, which creates some beautiful colors in IR photos. Contrast measurements and sharpness are about average with this filter.

  • 850nm: When you want to shoot IR photos that are primarily black and white with little to no visible color, this is the filter to use. This filter also creates photos that are noticeably sharper than the other choices on this list. Because this filter blocks all visible light, it produces some unique images in areas with a lot of IR light.

Materials

One other important feature of an IR lens filter is the quality of the materials. The metal ring around the outside of the filter is made of durable brass in higher-quality filters and aluminum in cheaper ones.

Infrared lens filter prices

Infrared lens filters cost between $20 and $100. The least expensive filters do not match the build quality of the pricier filters, but they may be fine for people who just want to try out IR photography.

A filter that blocks a wider range of light may cost a little bit more, but the difference in price based on this factor is minimal. Most of the price difference relates to the quality of the materials used in the filter. Photographers who have experience in IR photography and are seeking the best quality may feel comfortable spending in the $40 to $100 range.

Tips

Here are a few other options for creating IR photos.

  • Try an infrared camera. There are a few cameras available that have an infrared image sensor, which measures infrared light rather than visible light. An IR-only camera is an expensive option, though, so you’ll want to be certain you like IR photography before you spend this kind of money.

  • Convert an existing camera. If you’d rather convert an existing camera to infrared sensitivity versus using a lens filter, you can, but you’ll need to send the camera to a company that specializes in whole-camera IR conversion. This is also an expensive choice.

  • Use photo editing software. Many of these programs can take a typical full-color photo and convert it to an infrared simulation. Understand that this won’t look as great as a photo shot with an IR filter or an IR camera.
Content Image
An IR lens filter won’t work with certain cameras that have an IR block built over the image sensor. Conversion of the camera is the only option for shooting IR photos in this case.

FAQ

Q. How do I focus when using an infrared lens filter?

A. This is a tricky part of IR photography. The DSLR’s autofocus system won’t work because the IR filter blocks too much visible light. You should position the camera to shoot the scene you want without the infrared filter attached. Adjust the focus manually or use the infinity focus setting. Then carefully attach the filter and shoot the photo.

Q. What other camera settings should I adjust to take photos with a lens filter?

A. Because the infrared filter blocks visible light, you’ll have to shoot in a manual control mode, adjusting the settings yourself. The camera can’t successfully adjust them. Set the aperture between f/8 and f/11, which makes it easier to use infinity focusing for the best results. You’ll have to use the Bulb shutter speed setting, too, so you can keep the shutter open for 30 seconds or longer. You’ll have to use some trial and error to find the right exposure time.

Q. My infrared photos don’t look great right out of the camera. What am I doing wrong?

A. You may not be doing anything wrong. To add a bit of pop and sharpness to your infrared photos, you might need to run the image through photo editing software. Many of the best photos you find online have been edited. Shooting in the RAW image format and adjusting the white balance in editing software often helps a lot.

Q. How do I find a good subject for infrared photography?

A. Landscape photos typically work best. Plants reflect IR light, giving them a striking appearance in this type of photo, whereas they’re rarely the focal point in a color photo. Water also gains an interesting look in IR photography because it turns black. Skies are much darker than in color photos, too.

Our Top Picks